Beijing Shengbo Lan assists Meizhou in emergency product training

I. Product Introduction

The audio-video life detector enables rescuers to see and communicate with those trapped under rubble. Highly favored by rescue teams worldwide, this video life detector can detect victims trapped in rubble and provides clear communication and video capabilities. Images and sounds can be transmitted wirelessly to command centers. Suitable for rescue operations after fires, earthquakes, bombings, and building explosions (caused by gas or other means).

Using units: Fire departments, seismological bureaus, maritime bureaus, civil defense bureaus, work safety bureaus, armed police forces, reserve forces, etc.

II. Product Advantages:

1. The main unit uses a 10-inch color display screen.

2. The main unit supports four probes working simultaneously, with four types of probes that can be switched at any time. It can display simultaneously or switch to three, two, or independent display modes, offering 12 split-screen modes to choose from.

3. Equipped with four types of probes for different environments: 360° rotating video probe, infrared thermal imaging intercom probe, underwater probe, and snake-eye probe.

III. Technical Parameters:

1. Main Unit:

1.1 The main unit supports four probes working simultaneously, with four types of probes that can be switched at any time. It can display simultaneously or switch to three, two, or independent display modes, offering 12 split-screen modes to choose from.

1.2 Main unit size: 10-inch (24.5cm diagonal) LCD screen, with language selection, time setting, recording resolution, recording mode, recording channel selection, video viewing, screen capture, and screenshot viewing functions.

1.3 Has recording and loop playback functions, with a recording duration of up to 1 minute.

1.4 The main unit has a shoulder strap for easy carrying.

1.5 Equipped with noise-reducing headphones for two-way communication, allowing conversations or reassurance with trapped individuals.

1.6 Built-in high-capacity lithium battery, continuous working time of 10 hours, with an additional independent battery pack for extended operation.

1.7 Features a command terminal. The wireless communication distance between the command terminal and the audio-video main unit is ≥100m, sharing video images in real-time for efficient deployment of rescue plans.

2. 360° Rotating Audio-Video Probe:

2.1 Probe outer diameter 40mm, with 12 built-in LEDs supporting brightness adjustment for use in dark environments.

2.3 The probe can be controlled via the main unit buttons for 360° horizontal rotation and 180° vertical flipping.

2.4 The probe has a built-in microphone and speaker, supporting two-way voice communication.

3. Infrared Thermal Imaging Intercom Probe:

3.1 Probe diameter 40mm, thermal imaging resolution 384*288, multiple pseudo-color display modes, with 5 color palette adjustment modes.

3.2 Detection distance up to 200m, capable of displaying human body thermal imaging spots; at a detection distance of 100 meters, it can display thermal imaging contours.

3.3 The probe has 6 built-in LED lights, supporting 10 brightness adjustments for auxiliary lighting in dark environments.

3.4 The probe front has a built-in positioning light, which can be turned on separately via the main unit buttons to assist in locating trapped individuals and to help trapped individuals find rescuers.

3.5 Features two-way voice communication for conversations and reassurance with trapped individuals. It can collect audio signals within a 10-meter radius.

4. Underwater Probe:

4.1 Protection level IP68; 20-meter underwater cable; probe clarity up to 1080P for clearer underwater detection.

4.2 The probe can be controlled via buttons for 360° free rotation and rotation speed adjustment, allowing detection of specific areas, and displaying the rotation angle on the main unit screen.

4.3 Built-in 12 high-brightness LEDs, with adjustable LED switch, enabling detection in dark or murky water.

5. Snake-Eye Probe

5.1 The snake-eye probe has a maximum outer diameter of 10mm and a length of 5m, suitable for use in pipes and narrower gaps.

5.2 Built-in 4 LEDs, with controllable LED switch and brightness adjustment; the probe is waterproof, suitable for use in rain, damp, and shallow water.

6. Handheld Telescopic Probe: Equipped with a handheld telescopic probe, with a telescopic length of 2.2 meters and a soft connection at the top for flexible bending and direction changes.

7. Earphone: High-gain microphone amplifies low-amplitude sounds, allowing the detection of faint sounds from victims, with a built-in audio module for communication with victims.

8. Spare Battery Pack: Extends the operating time of the main unit.

V. Product Configuration:

1. Main unit 1 unit

2. Telescopic pole 1 unit

3. Infrared thermal imaging intercom probe 1 unit

4. Underwater probe 1 set

5. 360° rotating audio-video probe 1 set

6. Snake-eye probe 1 unit

7. Noise-canceling headphones 1 unit

8. Spare battery 1 unit

9. Charger 1 unit

10. Instruction manual 1 copy

11. Certificate of Conformity, warranty card Each 1 copy

I. Product Introduction:

In recent years, along with the rapid development of the local economy, various regions have experienced varying degrees of environmental pollution incidents involving water, air, and noise, seriously affecting people's quality of life and hindering the sustainable development of the local economy. With the promulgation and implementation of various environmental protection policies and regulations formulated by the state, while local governments at all levels have paid increasing attention to environmental governance within their jurisdictions, they have also increased investment in environmental monitoring and emergency monitoring. Various regions have successively planned and equipped (on-site air monitoring instruments) wireless multi-gas detectors. Portable air quality monitoring equipment is more convenient and efficient for multi-point urban mobile environmental monitoring, emergency air quality monitoring after the handling of emergencies, and irregular spot checks of key polluting enterprises, meeting the requirements of on-site air quality forecasting.

II. Product Features:

1. The gas collection terminal host screen has a diagonal of ≥17.5cm, and can simultaneously monitor gas, meteorological, and on-site video parameters, which are transmitted wirelessly in real time to the backend command terminal, and viewed by command personnel through professional software.

2. Displays real-time information on 10 types of gas concentrations, alarms, time, temperature, humidity, wind speed, and wind direction, and allows for setting alarm values.

3. Command terminal (receiving end) with two displays:

3.1 The upper screen of the command terminal has a diagonal of ≥39cm, which can display the video acquisition terminal image, and the pan-tilt can be controlled through the receiving end, allowing the probe to rotate 355° horizontally and 0-90° vertically for detection.

3.2 The lower screen of the command terminal has a diagonal of ≥25cm, which can display the measured values of gas, alarm set values, temperature and humidity, wind speed, and wind direction parameters.

4. Large-capacity data storage function, supporting real-time storage and local viewing of historical records.

5. The triangular bracket is used with the host.

III. Technical Parameters

Acquisition terminal

1. Can detect 10 types of gases:

(1) Combustible gas (Ex) 0-100% (default)

(2) Chlorine gas (CL2) 0-100% (default)

(3) Nitric oxide (NO) 0-100% (default)

(4) Oxygen (O2) 0-30% (default)

(5) Nitrogen dioxide (NO2) 0-20ppm (default)

(6) Phosphine (PH3) 0-20ppm (default)

(7) Carbon monoxide (CO) 0-1000ppm (default)

(8) Hydrogen sulfide (H2S) 0-100ppm (default)

(9) Ammonia (NH3) 0-100ppm (default)

(10) Sulfur dioxide (SO2) 0-20ppm (default)

2. Detection accuracy: ±1%(F.S); Linearity: ±1%; Repeatability: ±1%

3. Alarm method: Audible and visual alarm

4. Response time: T90≤20 seconds

5. Recovery time: 30 seconds

6. Detection method: Pump suction type, flow rate 3000mL/minute, gas intake can be manually adjusted.

Anemometer:

1. Uses a mechanical mode, which can display wind speed level and wind direction according to the detection site.

2. Temperature: -40℃~+80℃, accuracy ±0.5℃

3. Humidity: 0-100%RH, accuracy ±4%RH

4. Wind speed: 0-30 meters/second; Wind direction: 8 directions

5. Accuracy: ±3%

Gas Acquisition Terminal:

1. The host screen has a 17.5cm diagonal, touchscreen design, and displays real-time alarm values for 10 types of gas concentrations, temperature, humidity, wind speed, and wind direction, etc. It also has audio-visual alarm functions and allows for setting alarm values.

2. Alarm method: Audio, visual, and screen display alarm methods. Displays the current exceeding gas value. Alarm decibels: 100db. The corresponding gas sensor on the screen turns red during an alarm.

3. Air intake method: Pump suction

4. Alarm value setting: Touchscreen keyboard to set any alarm value.

5. Power-on self-test: The gas acquisition end has a power-on self-test function and audio-visual alarm function. The buzzer can be manually turned off. It has a 5-level battery level display.

6. Wireless communication: Wireless transmission distance is 150 meters in open environments.

7. Humidity: The gas acquisition end shows no condensation at 95%RH humidity.

8. Protection level: IP55.

9. Working time: Built-in lithium battery, working time 30 hours (non-alarm state).

10. Installation method: Supported by a triangular bracket and self-contained rubber foot pads.

Gas receiving end:

1. Display screen: The upper screen uses a 15.6-inch (39.6 diagonal) color LCD screen with a resolution of 1366*768; the lower screen uses a 10-inch (25.5cm diagonal) color touchscreen with a resolution of 1024*600. The upper screen displays the video acquisition image, and the PTZ can be controlled through the receiver to allow the probe to monitor without blind spots at 355 degrees left and right and 0-90 degrees up and down. The lower screen displays the measured gas values, alarm setting values, temperature and humidity, wind speed, wind direction, etc., with audio-visual and screen display alarms.

2. The gas receiver has a video storage function, using a 320GB large-capacity storage, and has a split-screen display function, or a single screen.

3. The gas receiver can playback and view gas detection curve graphs for different time periods.

4. Alarm method: Audio-visual alarm, alarm decibels 80db, the corresponding gas sensor on the screen turns red during an alarm.

5. Alarm response: 500 milliseconds (test data within 30 meters).

6. Wireless communication: The gas sensor data wireless transmission distance is greater than 200 meters, and the video ball monitoring module video transmission distance is greater than 150 meters.

7. Working time: Built-in lithium battery, working time is 6 hours, can be directly connected to the power supply.

Video monitoring probe:

1. The video monitoring probe can monitor the on-site images in real time. The probe uses ultra-high-definition cameras and has a recording function, allowing for playback and viewing of historical records.

2. Video monitoring probe: Can rotate automatically or be manually controlled.

IV. Configuration list:

1. Acquisition end 1 unit

2. Receiving end 1 unit

3. Video monitoring probe 1 unit

4. Wind speed and direction monitor 1 unit

5. Antenna 1 set

6. Triangular bracket 1 unit

7. Charger 1 set

8. Carrying case 1 unit

9. Instructions, qualification certificate, warranty card 1 set